Is It Time?
Signs your gelcoat needs attention
UV, salt and heat break down gelcoat slowly, then quickly. Catching it early means correction instead of a costly repaint.
Chalky residue
A white film comes off on your hand when you touch the hull.
Faded color
Colored hulls look washed out and white gelcoat turns gray or flat.
No reflection
The surface no longer mirrors the dock, the sky or the water.
Stains & yellowing
Waterline scum, exhaust and rust stains that washing will not remove.
One Service, Two Stages
Restore the gloss. Then protect it.
Correction brings the finish back. Ceramic coating keeps it that way, so you spend more time on the water and less time polishing.
Stage 1
Gelcoat Restoration
Multi-stage machine compounding and precision polishing remove oxidation, staining and imperfections layer by layer, preserving as much original gelcoat as possible.
- Oxidation and chalking removed
- Stains and waterline scum corrected
- Swirl marks and haze refined to a deep gloss
- Gelcoat chips and holes repaired and color-matched
Stage 2
Marine Ceramic Coating
A crystal-clear coating that bonds to freshly corrected gelcoat or paint, forming a hard, glossy barrier that outperforms traditional wax and sealants.
- Strong UV and oxidation resistance
- Hydrophobic: water, salt and grime slide off
- Easier, faster washdowns
- Long-lasting gloss with proper maintenance
Before & After
Gelcoat brought back to life
Recent gelcoat repair and restoration work from South Florida marinas.
Transom & swim platform: old hardware holes filled, gelcoat matched and restored
Hull flare: damaged area repaired and blended into a seamless white finish
Our Process
From oxidized to mirror gloss
We match the cut to the condition, removing only what is necessary at every stage.
01
Inspection & Decontamination
We assess oxidation depth and gelcoat thickness, then wash away salt, grime and contaminants.
02
Repair & Wet Sanding
Chips and holes are repaired, and heavy oxidation is leveled with progressive grits where needed.
03
Multi-Stage Compounding
Machine compounding removes the oxidized layer, staining and sanding marks.
04
Precision Polishing
Fine polishing refines the surface to a deep, uniform, mirror-like gloss.
05
Ceramic Coating
The coating is applied panel by panel and cured to lock in the finish.
Protection Compared
Wax, sealant or ceramic?
All three add shine. Only one is built to keep it through a South Florida season.
| Marine Wax | Polymer Sealant | Ceramic Coating | |
|---|---|---|---|
| Durability | Shortest; wears off quickly in sun and salt | Moderate | Longest-lasting with proper care |
| UV & oxidation protection | Light | Good | Excellent |
| Water beading | Fades fast | Good | Strongly hydrophobic |
| Gloss & depth | Warm shine | Slick shine | Deep, glass-like gloss |
| Maintenance | Frequent reapplication | Periodic reapplication | Easy washdowns, periodic top-ups |
An Honest Recommendation
Restore the gelcoat, or paint?
We will always tell you which option your yacht actually needs.
Gelcoat restoration is right when…
- Oxidation is surface-level to moderate
- There is enough gelcoat thickness left to correct
- You want to keep the factory finish and color
Painting is right when…
- Gelcoat is worn through, crazed or cracked
- Previous repairs no longer match
- You want a new color or a metallic finish
Gelcoat FAQ
Gelcoat & ceramic questions
Not sure if your gelcoat can be saved? We will inspect it and tell you honestly.
What causes gelcoat oxidation?
UV exposure, salt and heat break down the resin at the surface of the gelcoat, leaving it porous, chalky and dull. South Florida’s sun speeds the process up.
How often should gelcoat be restored?
It depends on sun exposure, storage and maintenance. A ceramic coating and regular washing greatly extend the time between corrections, and we will recommend a care schedule for your yacht.
Does my yacht need to be hauled out?
Topsides and superstructures are usually restored in the water at your dock. Below-waterline work requires a haul-out, which we can coordinate.
Can ceramic coating be applied without polishing first?
A coating locks in whatever is underneath it, so the gelcoat should be corrected first. That is why we offer restoration and ceramic coating as one service.
How long does a ceramic coating last?
A professionally applied marine ceramic coating lasts far longer than wax or sealant. How long depends on exposure and care; regular washdowns and periodic top-ups keep it performing.
Can you repair chips and holes in gelcoat?
Yes. Chips, screw holes and small damage are filled and color-matched so the repair blends into the surrounding finish before polishing.
Free Assessment
Bring back the shine and keep it
Tell us about your vessel and where it’s docked. We’ll inspect the gelcoat on-site and recommend exactly what it needs, with no obligation.
Request an Assessment
Fill this out and our team will be in touch.